Aluminum scrap, in the form of turnings, filings, chips and shavings, ecohydraulic briquetting machine uses hydraulic to compress aluminum scrap into dense briquettes and separate any fluids used in the metalworking process from the scrap metal, allows manufacturers to both eliminate costs and create a new revenue. Jiangyin Metallurgy Hydraulic (brand Ecohydraulic) devoted to offer solution for the biggest apple aluminium products manufacturer, FOxcnn for over 8 years.

Y83W series horizontal metal scrap briquetting machine is specially designed for foundry and metal scrap processing industry. 1) on the basis of vertical briquetting press, scraps can be pressed can be within 10cm. 2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips etc. 3) make waste storage area clean and green. 4) much lower than vertical one, suit the workshop with low height. Steel briquetting can double the value of your chips, briquettes are easier to manage, transport, sell and recycle.

Copper shavings, chips, turnings and filings take valuable space, time and resources to deal with, Ecohydraulic briquetters turn your scrap copper into compressed blocks that are easier to handle, store and transport and can be sold for recycling. Our briquette machine compresses your copper with no added materials, so the quality and purity of the metal are maintained, this maximizes the value of the copper.

Y83W-2000 horizontal steel briquette making machine, briquette diameter 410mm, block weight about 200kg, total power 600kw, output about 32t/h.

Particle shape cast iron powder can be cold pressed to cylindrical briquettes by SBJ series briquetting press, to a density of 5.5~6ton/m3 (adhesion agent is not used) and the production could be 8~20 tons per shift. The machine is vertical structure with upper and lower beams made of cast steel. The whole working process is automatic (PLC controlled). It also can be equipped with different cooling system. Features: 1) Speed-up system, coordinated with the customized speed-up integrated value block, the speed of initiative hydraulic speed-up system can be increased more than one time. Selectable cooling system, we recommend suitable cooling system, air cooling or water cooling according to your working condition. 2) High-density briquettes, the high density of the briquettes ensures their suitability for transport and guarantees best melting results. 3) Customize accessories, we persist providing long-term cooperated suppliers with timely feedback on value body and oil pump. Improving the design and quality of accessories.

All kinds of metal scraps, waste steel, copper, aluminum shavings, car shells, etc., is produced every day of production, our hydraulic metal baler can compress every kinds of metal leftover materials into qualified charging such as square, cylinder, octagon body and other shaps. This machine reduce your cost of transporation and smelting, is mainly suitable for steel recovering and processing industries, ferrous and non-ferrous smelt industries: 1) lining plate--Hardox500. 2) bale discharging way include turn-out, side push-out and forward-out. 4) designed with quick unit that can improve work efficiency substantially.

Ecohydraulic alligator shear cut scrap metal into smaller pieces and help to separate different materials types, earning you more money from your scrap metals. Alligator shears are ideal for waste materials recycling processing industries, scrap metal (iron, steel, steel pipe, etc.) cold shearing to different section forms of middle and small steel factories. With operator safety uppermost in mind, our shears are equipped with blade guards and foot operated switches.

We have been working with same customer for many years, each baler can be customized.

This horizontal briquette machine with double bale discharge hole is used for aluminum recycling, specially for large manufacturer and recycling center, with integrated feeding system and briquetting system, divided into the following structure: 1) dual mode discharge structure, capacity 1.8t/h. 2) screw discharging structure, 5 briquettes per minute. 3) fully closed structure for safety operation.

1) If your scrap material is scrap metals, non-ferrous metals, color metals, we recommend Y81F series metal baler to you, which has high pressing force with bales tilting out design. 2) If your scrap material is lightweight metals, such as scrap aluminium,scrap copper,tin cans ,buckets, we recommend our Y81Q series metal baler to you, the bales will be pushed from baler forward. 3) If your scrap material is heavy metals,then we recommend our Y81T series metal balers to you, the bales will be pushed out from the side of the metal baler.

We Ecohydraulic customize balers especially for cans, tin cans, aluminum cans and other loose metal materials, mostly are exported to Brazil.

We factory professionally manufacture kinds of metal recycling machines for 31 years.

We have agent in Russia, every year, we exported several machines to Russia.

Y83L series aluminum shavings briquetting machine is designed specially for aluminum chips & shavings or other light thin metal scrap. Its density can be 2.3t/m3. 1) with pre-pressing system, output greatly improved. 2) cutting fluid can be recycled.

Correctly use the equipment, strictly carry out the maintaining system and obey to the safety operation rule so as to prolong the using life of machine, improve the production efficiency and guarantee the production. Therefore, we suggest user to establish the maintaining system and safety operational rule, let the operators familiar with machine structure and operational procedure. Otherwise, pay attention to following key points: 1. Only after the oil has been filtered strictly, it can be added into oil tank. Always keep enough oil volume in tank. If oil is not enough, add at once. For each one half and a hour, add the lubrication oil. For each work shit(8 hours). At least add 5~6 times lubrication oil in all lubrication position. 2. Change with one time of new oil into tank and clean up the tank for each half year, but the first time to change oil and clean up tank can`t be later than one month. 3. Lubricate all points in machine according to requirement. 4. After every day shift, clean up the sundries in material tank, keep the outer cleanness of the machine.

1. Before work of each shaft, the machine should be checked fully. If oil leakage is found, please replace seal component in time. 2. Before start, check whether the oil level in oil tank is lower, and open the circulation cooling water. 3. During start, check if the rotation direction of oil pump is correct. 4. Replace the hydraulic oil regularly, new machine should be replaced per three months, then replace it per half year and fully clean the oil tank. 5. Note: when the new machine has been used for 3 months, the hydraulic oil can be used again after filtering through strainer of above 100meshes. 6. The strainer of oil filter should be stripped and cleaned or replaced weekly. 7. During work in summer, please note change of oil temperatur

Scrap metal recycling includes the recovery and processing of scrap metal from end-of-life products as well as from manufacturing scrap, so that it can be introduced into new goods. Scrap metal recycling includes a number of steps such as recovery, sorting, brokering, baling, shearing, smelting, etc.

Metal chips briquetter is mainly used in steel manufacturer and many waste disposal recycling center, it can compress many materials such as iron scraps, aluminum scraps, stainless steel scraps, copper scraps and other ferrous and non-ferrous metals shavings, chips, turnings, borings, etc. Working principle: The metal chips is put into the bunker, transferred to the hopper by conveyor, then the main cylinder starts to press the chips, the side cylinder pushes the block out, at last, each cylinder is back to initial position, the bale cycle is finished totally.

Metal Baler finds wide application in steel mills, metal recycling and processing industry, and metal smelting industry. Using metal baler to extrude various metal scrap into bales can reduce storage space and transportation cost, meanwhile increase feeding speed. To buy a metal baler, there are a few tips to be noted. Bale shape, press chamber size and bale discharge way. Metal baler has large economic value and environment value, it can increase work efficiency as well as benefit the environment and energy use. If you are interested in buying metal baler, you can rely on use for the wide selection.

Hydraulic Oil Drums Baling Machine Press Crusher Compactor is designed to crush strandard 55 gallon steel drums, Siemens PLC automatic control, crushing chamber completely enclosed. Ecohydraulic automatic drum compactor is a kind of machine that specially designer by Ecohydraulic. It is applied to compress drums/barrels, automatically control. Production can reach to 4 drums/minute, 240 drums/hour. Extremely high production capacity.

The DeCanning of catalytic converters, containing ceramic honeycomb bricks, implies opening the converter in order to separate the ceramic brick from the steel can. This operation is done by hydraulic shear. Alternative processes include a plasma cutter for big catalytic converter and DPF(Diesel Particulate Filter). Whaterver the process used, make sure to pay proper attention to dust collection and safety.

We Ecohydraulic attends many exhibitions all over the world.